Tonneau covers are designed to distribute the weight evenly. So standing on a folding tonneau cover, even briefly, is not recommended. But if you need to stand on a folding tonneau, make sure it is a hard folding tonneau cover and only stand on it when it is doubled back on itself. This also has an added benefit. You are never standing on the top of the tonneau cover, only the bottom, protecting the top of your tonneau cover from any visual blemishes or scuffs. Please keep in mind you are... view full answer...
Yes, we do! We actually have nine different options for retractable tonneau covers that fit the 2023 Ram 2500 Limited with the short 6-1/2' bed and RamBoxes. Five of them are manual and four of them are powered. I have listed them all below:
Powered Retractable Tonneau Covers
PowertraxONE MX Hard Tonneau Cover - Powered - Polycarbonate - Matte Black item # RT70235
PowertraxPRO MX Hard Tonneau Cover - Powered - Aluminum - Matte Black item # RT90235
Pace Edwards Bedlocker Retractable... view full answer...
The BAK Revolver X2 Hard Tonneau Cover part # BAK39207RB is an excellent choice for your 2017 Ram 1500. The shipping weight of the item is about 80 lbs. Though it is certainly not a light package, the tonneau cover comes in two different pieces making assembly a less strenuous task. The bed rails weigh about 13 lbs. and the cover itself weighs about 65 lbs.
For a similar style tonneau cover confirmed to fit your vehicle, I recommend using the Pace Edwards JackRabbit Hard Tonneau Cover... view full answer...
Absolutely; the weight is 80 lbs for the Leer tonneau cover you asked about which fits your 2019 Ford F-250 with a 6'9" bed:
- Leer Hard Tonneau Cover # LE74FR
This is a really nice option for a tonneau cover that is really easy to use. You can open it by simply pinching its latches on the underside of the cover near the tailgate, so it's a lot easier to get the cover folded than other tonneaus. This Leer tonneau is also extremely low profile, sitting less than half an inch above your... view full answer...
For a tonneau cover that fits your 2024 Ford Maverick and is compatible with the Yakima OutPost HD Overland Truck Bed Rack item # Y01152-5755 you will need the RetraxONE XR Hard Tonneau Cover item # RTX83QR. This tonneau cover has the built in t-slots that will allow the ladder rack to install directly to. view full answer...
I spoke to my contact at Extang and he informed me that the Replacement Velcro Strip for Extang Express Tonneau Covers part # EX1044 is 1" wide x 8' long. The velcro strips are cut to fit and designed to fit into the rails on the Extang Express tonneau covers. If this velcro strip does not work for you please let me know what tonneau cover you have and I would be happy to see if we have a better fit for you as we stock various types of replacement velcro strips for tonneau covers. view full answer...
The BAK Revolver X2 Hard Tonneau Cover # BAK39121 referenced in your question has an overall installed weight of just about 90 pounds.
I have attached a short video demonstration on this particular tonneau cover that you can also check out. view full answer...
I checked with Extang and the replacement cover you need is the Replacement Tarp for Extang BlackMax Soft Tonneau Cover item # EX1560. This is the tarp that comes with the Extang BlackMax Soft Tonneau Cover EX2560 that fits the 83-93 Chevy S-10's. view full answer...
To add a tonneau cover and ladder rack to your 2024 Toyota Tundra with a 6-1/2' bed you will want the following parts:
Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters item # Y01151-5955
RetraxONE XR Hard Tonneau Cover - Retractable - Polycarbonate - Matte Black - Accessory T-Slots item # RTX47XR view full answer...
The Extang covers do not have an actual weight carrying capacity since that is not the cover's intended purpose. However,it is strong enough that a person could briefly stand or sit on the closed cover. I confirmed this with my contact at Extang.
Extang does offer a solid folding tonneau cover for your 2015 Chevrolet Silverado 2500 with 6-1/2-foot bed and without the cargo management system, that is the Solid Fold 2.0 Hard Tonneau Cover # EX83450. This and all other tonneau cover options... view full answer...
I went out to our warehouse for you and measured the BullRing Stake Pocket D-Rings part # BU58FR, the distance from the edge of the ring to the end of the plate is 7/8". view full answer...
The Access Vanish Soft Roll-Up Tonneau Cover # 834532007837 is a fit for your 2006 GMC Sierra 3500 dually. The side rails will come into the bed about 3-1/4 inches from the side rail and in certain locations a little further for the knob adjusters. The bottom of the tonneau will sit about 1 inch below the side rail height of your truck.
5th wheel hitches are height adjustable, so you will be able to fit it under your tonneau cover. The pin box turning clearance will be enough that you... view full answer...
The correct BAKFlip tonneau cover is the MX4 Hard Tonneau Cover item # BAK66AV. This is compatible with the Thule TracRac SR Sliding Truck Bed Ladder Rack item # TH43003XT-501EX and fits the 5-1/2' bed lengths of the 2024 Ram 1500.
This folding tonneau cover leaves the stake pockets open so you can mount the base of the TracRac to the side rails of your Ram truck. view full answer...
The correct Truxedo tonneau cover for the 1997 Toyota Tacoma is part # TX574101. For a replacement cover for this tonneau cover you will want # TX574101-CVR.
Part # TX1117651, which you referenced, measures 64-1/4x62-9/16x80-11/16. It is a replacement cover for part # TX581101, which fits Chevrolet trucks and not Toyota trucks like you have. view full answer...
The Thule TracRac SR item # TH43002XT-501 mounts to the stake pockets in your 2018 Ford F-150 so you're going to need a cover that leaves access to them. There's two different types of covers that will be the best for your set up:
Soft Cover - BAK Revolver X2 Hard Tonneau Cover item # BAK39327
Folding Cover - BAKFlip MX4 Hard Tonneau Cover item # BAK48327 view full answer...
I have a great solution to the problem. Unfortunately, since the Yakima OverHaul HD Adjustable Truck Ladder Rack # Y01151-58 uses the inside of the truck rails to install, it will interfere with your factory tonneau cover on your 2021 RAM 1500 (5-1/2 Foot Bed without Rambox). I went ahead and called my contact at Yakima to see if the Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks # Y01155 would work with the OverHaul HD and your cover, but Yakima... view full answer...
Thanks for reaching out about the Leer Hard Tonneau Cover - Quad Fold # LE97FR for your 2021 GMC Sierra 1500 with a 5-3/4' bed!
I reached out to my contact at Leer who said that the panels won't take up any bed space when folded up which doesn't make sense because there is a small front panel that the folded up panels sit on in that "opened" position.
Because of this I reached out to BAK about their BAKFlip MX4 Hard Tonneau Cover # BAK52FR and my contact said that the panels are going... view full answer...
Yes, it will. The Replacement Remote for Pace Edwards Bedlocker Retractable Hard Tonneau Cover item # PE33QJ is compatible with a Bedlocker electric tonneau cover. view full answer...
The Pace Edwards SwitchBlade Metal Hard Tonneau Cover - Retractable - Aluminum # 311-SMC0404 can support 200 lbs dispersed on top of the cover according to my contact at Pace Edwards. view full answer...
Yes, I do have a ladder rack that will work with your 2022 Ford F-250 Super Duty's Retrax Pro Tonneau Cover. It is the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack item # Y01151-58. This ladder rack has a weight capacity of 180 lbs off road and 300 lbs on-road. It has a crossbar spread of 36" - 89" and an upright adjustable height of 19" - 30" above truck bed rails.
You will need the Yakima Tonneau Cover Adapter Kit for Yakima OverHaul HD and OutPost HD Truck Bed Ladder Racks item... view full answer...